Search for: All records

Grain size analysis is an essential tool for classifying sedimentary environments. The main aim of the current research is to use granulometric analysis of the Bhikiysain palaeolake sequence along the Ramganga river to describe changes in the depositional environment within the lake during the late Quaternary. The granulometric analysis was conducted using a laser particle size analyser on 32 samples, collected at 10 cm intervals in a vertical palaeolake profile, at Bhikiyasain (Ramganga Basin). The results of the grain-size analysis indicate that the size distribution of the sediment is unimodal. The unimodal size distribution of the sediment suggests that the sediment was supplied via fluvial action. The Bhikiyasain Basin (29°43.106’ N; 79°15.682’ E) underwent tectonic activity around 44 ka, resulting in the ponding of the Ramganga river and the formation of palaeolake deposit. Based on grain size analysis, variation in the colour and lithofacies, the entire profile has been divided into 6 different zones (zones 1 to 6). The silt has the highest concentration in all the zones except for zones 1 and 3. Zones with high silt concentration are inferred to represent low energy depositional environments during the time of deposition. The higher amount of sand concentration in zones 1 and 3 represent higher energy depositional environment. For the whole profile, the sorting of the samples varies between 1.1 and 2.0, indicating poor sorting of the samples. The poorly sorted sediment in all six zones represents limited transportation of sediment from the catchment and also suggests that the sediment was deposited in a low energy environment. The ternary plots also signify the dominance of silt followed by sand and clay. The skewness values range from 0.1 to 0.5 which indicates that the samples are symmetrical to very finely skewed. Variability in the skewness values may be due to changes in the intensity of wind and hydrodynamic conditions of the lake. The kurtosis value ranges from 0.9-1.4, indicating the samples are platykurtic, leptokurtic and mesokurtic in nature. Variability in the kurtosis may be due to changes in the flow characteristics of the depositional medium. 

The Indian (southwest) summer monsoon is one of the most intense climatic phenomena on Earth. Its long-term development has been linked to the growth of high topography in South and Central Asia. The Indian continental margin, adjoining the Arabian Sea, offers a unique opportunity to investigate tectonic–climatic interactions and the net impact of these processes on weathering and erosion of the western Himalaya. During International Ocean Discovery Program Expedition 355, two sites (U1456 and U1457) were drilled in Laxmi Basin in the eastern Arabian Sea to document the coevolution of mountain building, weathering, erosion, and climate over a range of timescales. In addition, recovering basement from the eastern Arabian Sea provides constraints on the early rifting history of the western continental margin of India with special emphasis on continental breakup between India and the Seychelles and its relationship to the plume-related volcanism of the Deccan Plateau. Drilling and coring operations during Expedition 355 recovered sediment from Sites U1456 and U1457 in the Laxmi Basin, penetrating 1109.4 and 1108.6 m below seafloor (mbsf), respectively. Drilling reached sediment dated to 13.5–17.7 Ma (late early to early middle Miocene) at Site U1456, although with a large hiatus between the lowermost sediment and overlying deposits dated to <10.9 Ma. At Site U1457, a much longer hiatus occurs near the base of the cored section, spanning from 10.9 to ~62 Ma. At both sites, hiatuses span ~8.2–9.2 and ~3.6–5.6 Ma, with a possible condensed section spanning ~2.0–2.6 Ma, although the total duration for each hiatus is slightly different between the two sites. A major submarine fan draining the western Himalaya and Karakoram must have been supplying sediment to the eastern Arabian Sea since at least ~17 Ma. Sand mineral assemblages indicate that the Greater Himalayan Crystalline Sequence was fully exposed to the surface by this time. Most of the recovered sediment appears to be derived from the Indus River and includes minerals that are unique to the Indus Suture Zone, in particular glaucophane and hypersthene, most likely originating from the structural base of the Kohistan arc. Pliocene sandy intervals at Site U1456 were deposited in lower fan “sheet lobe” settings, with intervals of basin plain turbidites separated by hemipelagic muddy sections deposited during the Miocene. Site U1457 is more distal in facies, reflecting its more marginal setting. No major active lobe appears to have affected the Laxmi Basin since the Middle Pleistocene (~1.2 Ma). We succeeded in recovering sections spanning the 8 Ma climatic transition, when monsoon intensity is believed to have changed strongly, although the nature of this change awaits postcruise analysis. We also recovered sediment from a large mass transport deposit measuring ~330 and ~190 m thick at Sites U1456 and U1457, respectively. This section includes an upper sequence of slump-folded muddy and silty rocks, as well as underlying calcarenites and limestone breccias, together with smaller amounts of volcanic clasts, all of which are likely derived from the western Indian continental shelf. Identification of similar facies on the regional seismic lines in Laxmi Basin suggests that these deposits form parts of one of the world’s largest mass transport deposits. Coring of igneous basement was successful at Site U1457. Recovery of massive basalt and associated volcaniclastic sediment at this site should address the key questions related to rifting and volcanism associated with formation of Laxmi Basin. Geochemical analysis is required to understand the petrogenesis and thus the tectonic setting of volcanism that will reveal whether it is oceanic basalt or volcanic rock contaminated by underlying continental crust or continental flood basalt. However, the fact that the lavas are massive and have few vesicles implies water depths of eruption likely deeper than 2000 m. This precludes opening of the basin in the presence of a major mantle thermal anomaly, such as that associated with the Deccan Large Igneous Province. Other observations made at the two sites during Expedition 355 provide vital constraints on the rift history of this margin. Heat flow measurements at the two drill sites were calculated to be ~57 and ~60 mW/m2. Such heat flow values are compatible with those observed in average oceanic crust of 63–84 Ma age, as well as with the presence of highly extended continental crust. Postcruise analyses of the more than ~1722 m of core will provide further information about the nature of tectonic–climatic interactions in this global type area for such studies.